2010 Aprilia 750 Shiver2010 Aprilia Shiver is without doubt the benchmark bike in the medium cc naked sector. A highly evolved engine fitted with latest generation integral Ride by Wire, a multimap, a first-rate chassis which is able to satisfy all levels of riders, and technical outfit that no other bike even comes close to.
Today, these features are highlighted by an even more racing look, with the arrival of a new top fairing and aggressive Wave discs. At the same time, Aprilia Shiver has come even closer to satisfying the needs of riders, with totally revamped ergonomics, a 5 cm slimmer saddle to provide better control optimising bike handling not only on the road, but also when the engine is switched off. The rider and passenger footpegs are also new and contribute to lending the bike an enhanced sporting look. The moved-back rider footpegs and the new handlebar inclination allow for a more sporting use.
Design
The new Shiver roundly focuses on racing aspects. The new colours, the wave-style discs and the new racing rider footpegs are just a few of the signals that Shiver sends out to those observing it. The line remains very streamline and Italian and thanks to the clever use of the new colours and graphics, Shiver moves up a few notches as far as balance and aggression are concerned, highlighting some techniques that really make a difference, such as, for instance, the side shock absorber or the mixed steel trellis frame and aluminium plates.
The new Shiver roundly focuses on racing aspects. The new colours, the wave-style discs and the new racing rider footpegs are just a few of the signals that Shiver sends out to those observing it. The line remains very streamline and Italian and thanks to the clever use of the new colours and graphics, Shiver moves up a few notches as far as balance and aggression are concerned, highlighting some techniques that really make a difference, such as, for instance, the side shock absorber or the mixed steel trellis frame and aluminium plates.
The main features of the 2010 Aprilia 750 Shiver :
- V2 90° engine with four valves per cylinder, double overhead camshaft and liquid cooling
- the integral Ride-by-Wire tri-map technology developed for competitions
- modular trellis/aluminium frame with significant torsional rigidity
- aluminium swingarm with stiffener brace and lateral shock absorber
- 43mm upside down fork
- racing brakes with radial callipers and 320mm Wave discs
- New more protective top fairing
- New lower and slimmer saddle
- New racing style rider/passenger footpegs
The engine
The V90 engine is the result of the extensive experience Aprilia has in high performance mechanics. Thanks to its peculiar technical features the Aprilia twin-cylinder is able to combine an exceptionally high level of output with maximum exploitation rates and user-friendly riding options. The research conducted to reach top performance levels in its category has led to the decision to adopt some advanced cutting-edge technical solutions. The Aprilia V2 750 engine has a number of core features: extremely generous torque over most of the rpm range, insignificant vibrations, smooth full power delivery and output levels which are top in its category.
The 2010 version of Shiver naturally uses the multi-map integral Ride by Wire technology that has been developed even further exploiting the racing experience gained with the RSV4 superbike. This technical solution obviously represents the state-of-the-art version of engine control systems and Aprilia Shiver confirms its technological leadership position in its sector.
One touch of starter button is all that is needed when the rider decides to select one of the three mappings, and radically change the character of the bike:
One touch of starter button is all that is needed when the rider decides to select one of the three mappings, and radically change the character of the bike:
- "Sport" to have the "throttle in hand" when a rider needs to let off steam exploiting the entire character of this Italian twin cylinder bike;
- "Touring" when smoother power delivery and fluidity are essential during the moments when the racing desires are set aside to enjoy a more relaxing ride, even two-up;
- "Rain" when grip is not as good as it should be and maximum safety is the main objective
Brakes
Last year version already mounted the radial callipers, which are a solution that made this a pioneer bike in this sector. The Shiver 2010 version adds the new Wave discs and this choice not only provides for a different aesthetic impact, but also for a more decisive braking action.
The rear brake features a 245mm disc with single piston calliper to provide adequate support to the front system. The brake master cylinders have also been revamped to ensure even more effective braking response.
Both the front and rear systems have metal braided braking pipes, derived from the aeronautic sector, which eliminate the annoying buffering effect of conventional pipes and guarantee maximum braking accuracy and top-class system.
It also comes in an ABS version, and adopts a 2-channel Continental system which is able to guarantee maximum levels of safety when braking in all conditions.
Last year version already mounted the radial callipers, which are a solution that made this a pioneer bike in this sector. The Shiver 2010 version adds the new Wave discs and this choice not only provides for a different aesthetic impact, but also for a more decisive braking action.
The rear brake features a 245mm disc with single piston calliper to provide adequate support to the front system. The brake master cylinders have also been revamped to ensure even more effective braking response.
Both the front and rear systems have metal braided braking pipes, derived from the aeronautic sector, which eliminate the annoying buffering effect of conventional pipes and guarantee maximum braking accuracy and top-class system.
It also comes in an ABS version, and adopts a 2-channel Continental system which is able to guarantee maximum levels of safety when braking in all conditions.
Suspension
The upside down fork has 43 mm stanchions with chill-cast bottom end to support the radial callipers and provide unparalleled smooth sliding action. The 120 mm travel makes it possible to easily face both urban and mountain roads.
The lateral shock absorber is fitted directly to the swingarm using a cantilever set-up and the spring preload and hydraulic rebound are adjustable; the rear wheel travel is 130 mm.
The upside down fork has 43 mm stanchions with chill-cast bottom end to support the radial callipers and provide unparalleled smooth sliding action. The 120 mm travel makes it possible to easily face both urban and mountain roads.
The lateral shock absorber is fitted directly to the swingarm using a cantilever set-up and the spring preload and hydraulic rebound are adjustable; the rear wheel travel is 130 mm.
No comments:
Post a Comment